IBM ThinkPad 760C, Руководство по обслуживанию

Страница: 290 / 327

Appendix D. Using PS2 Commands
You can enter the following PS2 commands from the DOS command
prompt (of OS/2 and Windows, also) to set the features for your
computer. When entering a command, enter it in the following
syntax.
PS2 [
Parameter1] [Parameter2] [Parameter3]
Syntax Rules
Follow the rules below when you enter a command.
Syntax Rule
| Select one of the options on either side of the vertical
bar ( | ).
Highlighted Enter the exact highlighted letters in either uppercase
or lowercase.
UPPERCASE Enter any value for the following:
XX: 0 - 20 HH: 0 - 23
MM: 0 - 59 SS: 0 - 59
The MM (minutes) and SS (seconds) are optional. The
default values are 0.
lowercase Command elements in lowercase are optional. For
example, PS2 SE OF and of PS2 SErial OFf gives the
same results.
Please note that PS2 commands are subject to change without
notice. If you enter a command written in this section and receive an
error, type PS2 ? and refer to the online help menu.
Copyright IBM Corp. 1995
273