IBM ThinkPad 760C, Руководство по обслуживанию

Страница: 251 / 327

What If Your Computer Does Not Work?
Printer Problems
Problem Action
The PC Card is shown as
“Ready,” but does not
work correctly. 1. Make sure the resources reserved for the PC Card do not conflict with those
for other system devices.
Refer to “Avoiding PC Card Resource Conflicts” on page 265.
2. Make sure the resources reserved for the PC Card match the settings in the
application program.
If you are using a modem card, check the COM number, I/O port
address, and IRQ level. If you are using a network card, check the I/O
port address, IRQ level, and memory window address. To check the
resources assigned to the PC Card, click on the Status button in the PC
Card Director program.
3. If you are using an I/O PC Card:
The PC Card might work if you add the following in the CONFIG.SYS
file:
IBMDSS 1.SYS /IO =x
Where x is a slot number.
Problem Action
The printer does not work. Verify that:
The printer is turned on and ready to print.
The printer signal cable is connected to the correct connector on the
computer. (For the location of the printer connector, see “parallel connector”
on page 6.)
If the preceding items are correct and the printer still does not work, run the
tests described in the printer manual. If the tests show that the printer is OK,
have the computer serviced.
234
IBM ThinkPad 760C User's Guide