IBM ThinkPad 760C, Руководство по обслуживанию

Страница: 222 / 327

Installing Mwave DSP Support Software for Windows
Installing the Mwave DSP Support Software for Windows
Note:
When installing an operating system,
you need to install the Mwave DSP
support software. If you have multiple operating systems, you might need to install the
Mwave DSP support software for each operating system. For
example, to enable DOS and Windows applications for Mwave
functions, two separate Mwave DSP support software installations
are required: one for DOS and one for Windows.
The Mwave DSP support software is supplied in the Mwave DSP
Features Diskettes or on the hard disk drive of your computer.
If the Mwave DSP Features Diskettes were not supplied with
your computer, the support software is contained on the hard
disk drive. See the READ.ME file in the root directory of the
hard disk to install the Mwave DSP support software.
If the Mwave DSP Features Diskettes were supplied with your
computer, install the Mwave DSP support software and MIDI
sample files (if this is your first installation) as follows:
Warning:
Before you install the Mwave DSP
support software, close all open
applications.
1
Turn on the computer; then start Windows.
2
Select File from the Program Manager window; then
select Run... from the pull-down menu.
3
Insert the Mwave DSP Features Diskette 1 for Windows
into the diskette drive.
4
Type
A:SETUP
; then press Enter.
The following screen, which enables you to specify the
directory location of Mwave DSP support software, appears:
Mwave Installation
Please enter the desired location for the Mwave files.
OK Cancel
c:\MWW
Chapter 7. Installing Software
205