IBM ThinkPad 760C, Руководство по обслуживанию

Страница: 201 / 327

Installing the ThinkPad Features Program for OS/2
Installing the ThinkPad Features Program for OS/2
Note:
When installing an operating system,
you need to install the ThinkPad
Features program. To install the ThinkPad Features program:
1
Turn on the computer and start OS/2.
2
Insert the Utility Diskette into the diskette drive.
3
Install the ThinkPad System Management device driver.
Note:
To open the OS/2 full screen:
1. Select OS/2 System.
2. Select Command Prompts; then
select OS/2 Full Screen.
a) Open the System Setup folder in the OS/2 System folder.
b) Select Device Driver Install.
c) Click on the Install... button.
d) Click on ThinkPad System Management Device Driver;
then click on OK.
4
Open the OS/2 full screen command prompt.
5
Go to the
A:
prompt and type INSTALL2; then press
Enter.
Note:
To open the DOS full screen:
1. Select OS/2 System.
2. Select Command Prompts; then
select DOS Full Screen.
6
Install the DOS ThinkPad Features program to use the
PS2 commands.
a) Exit the OS/2 full screen; then open the DOS full screen.
b) Follow the instructions in “Installing the ThinkPad Features
Program for DOS” on page 192.
You have completed the installation of the ThinkPad Features
program.
If you want to continue to install all device drivers, continue with
“Installing the PCMCIA Device Driver for OS/2” on page 185.
184
IBM ThinkPad 760C User's Guide