IBM ThinkPad 760C, Руководство по обслуживанию

Страница: 202 / 327

Installing PCMCIA Device Driver for OS/2
Installing the PCMCIA Device Driver for OS/2
PC Card Director:
Page 54.
When installing an operating system, you need to install the
following device drivers and software associated with PCMCIA
before you can use the PC Cards:
Card Services device driver
Socket Services device driver
Resource Map Utility device driver
PC Card Power Management device driver
PC Card Director Utility
PC Card client device drivers (only when PC Card Director does
not support the PC Card)
To install the PCMCIA device driver:
1
Turn on the computer and start the operating system.
2
Insert the PC Card Director for OS/2 diskette into the
diskette drive.
3
Open the OS/2 full screen command prompt.
4
Type
C:\>A:\PCMINST2
on the command line; then press
Enter.
5
Follow the instructions on the screen.
6
Click on OK when you have completed the installation.
7
After the installation is complete, close all applications,
remove the diskette from the diskette drive, and restart
the system.
Note:
Whenever you update the
CONFIG.SYS file, refer to “Adding to
the CONFIG.SYS File” on page 253.
You have completed the installation of the PCMCIA device driver for
OS/2.
If you want to continue to install all device drivers, continue with
“Installing the Mwave DSP Support Software for OS/2” on page 186.
Chapter 7. Installing Software
185