IBM ThinkPad 760C, Руководство по обслуживанию

Страница: 139 / 327

Using Passwords
Entering a Supervisor Password
To set your supervisor password:
1
Type your supervisor password.
Each time you press a key, the symbol appears.
When typing your password, release each key quickly. If
you hold a key down too long, the same letter can be
entered repeatedly.
2
Press Enter.
When the password is entered correctly, OK appears.
When you enter the password incorrectly, X appears.
Enter the correct password.
If you fail to enter the correct password after three tries,
you must turn the computer off, wait at least 5 seconds,
and turn it on to try again.
Changing a Supervisor Password
To change your supervisor password:
1
Turn off the computer and wait at least 5 seconds; then
turn it on.
2
Start Easy-Setup.
To start Easy-Setup, press and hold F1 and turn on the
computer.
3
Type your current supervisor password at the power-on
prompt ( ); then press Enter.
4
Select the Password icon from the
Easy-Setup menu.
5
Select the Supervisor icon; then type your current
supervisor password and press the Spacebar.
A window appears so you can enter a new password.
122
IBM ThinkPad 760C User's Guide