IBM ThinkPad 760C, Руководство по обслуживанию

Страница: 282 / 327

Advanced Information for PC Cards
Avoiding PC Card Resource Conflicts
PC Card Director checks the resources for most devices used by the
system to avoid resource conflicts, but does not recognize all option
devices used. Especially, when you are using the Dock I or Dock II,
there is a possibility that the I/O port address or IRQ level may
conflict with the PC Card.
Check the status of the PC Card by using PC Card Director. When
the PC Card is set to “Ready,” the resources used for that PC Card
are displayed. Refer to the manuals supplied with the system or
option adapters to check that the resources for the devices in the
system or for the option adapters are not conflicting with the
resources for the IRQ level, I/O port address, or memory window of
the PC Card. If you are using OS/2 Warp Version 3, you can check
the assigned system resources using RMVIEW.EXE.
If there is a conflict:
Use the Resource Map Utility, so that those resources are not
assigned to the PC Card. (Change the value for the
/MA=
parameter, or add the
/MX=
,
/PX=
, or
/IX=
parameter.)
If you are using OS/2 Warp Version 3, use RESERVE.SYS to
register those resources in OS/2.
To set RESERVE.SYS, refer to the manuals or online help for
OS/2 Warp, or refer to the READ.ME file of PC Card Director.
If you are using Auto Configurator, change the enabling order or
resource information using the Auto Configurator Utility.
See “Starting the Auto Configurator Utility for DOS” on page 253
and “Starting the Auto Configurator Utility for OS/2 or Windows”
on page 249.
Change the parameter for the PC Card enabler. Refer to the
manuals supplied with the PC Card.
If you are using network cards, change the resource information
for the PC Card stated in the PROTOCOL.INI or NET.CFG file.
To change the configuration file of the network cards, refer to the
manuals or READ.ME files of the PC Cards or network drivers.
Appendix B. Advanced Information for PC Cards
265