IBM ThinkPad 760C, Руководство по обслуживанию

Страница: 115 / 327

Maximizing Battery-Powered Operation
W I N
If you are using Windows, follow these instructions to check and
install APM for Windows:
1. Start the system. Make sure that the current directory is
Windows (usually C:\WINDOWS>).
2. Type
SETUP
at the command prompt and press Enter. The
following screen appears.
Windows Setup
===============
If your computer or network appears on the Hardware Compatibility List
with an asterisk next to it, press F1 before continuing.
System Information
Computer: MS-DOS System
Display: Cyber932 8 ×6 256 small font
Mouse: Microsoft, or IBM PS/2
Note:
If “MS-DOS System with APM”
appears for the item “Computer:”,
APM is already installed. Press F3
to exit the setup. 3. Using the Arrow keys (
↑
,
↓
), position the highlighted cursor over
MS-DOS ** System and press Enter.
4. Position the highlighted cursor over MS-DOS System with APM
and press Enter.
5. Verify that the item “Computer” has changed to
MS-DOS System with APM on the screen. If not, return to step
3.
Windows Setup
===============
If your computer or network appears on the Hardware Compatibility List
with an asterisk next to it, press F1 before continuing.
System Information
Computer: MS-DOS System with APM
Display: Cyber932 8 ×6 256 small font
Mouse: Microsoft, or IBM PS/2
6. Press Enter to install APM.
7. Restart the system to make APM effective.
98
IBM ThinkPad 760C User's Guide