IBM ServeRAID, Справочник пользователя

Страница: 101 / 226

Function What it does Command and supported operating systems
synch This function synchronizes the parity
information on redundant logical drives. If
the parity information is inconsistent,
IPSSEND repairs it automatically. IPSSEND SYNCH controller DRIVE/GROUP scopeid
where:
v controller is the ServeRAID controller number (1–12)
v DRIVE is a single logical drive
v GROUP is a merge group
v scopeid is one of the following:
– If DRIVE, the logical drive number (1–8)
– If GROUP, the merge-group number
Supported operating systems: Windows, NetWare, OS/2,
Linux, OpenServer, UnixWare, Open UNIX, and DOS
Error-recovery functions
The following table describes the IPSSEND error-recovery functions.
Function What it does Command and supported operating systems
getstatus This function displays information about
the most recent rebuild, synchronization,
logical drive migration, or FlashCopy. The
information includes the type of operation,
status, logical drive number, logical drive
size, and percentage of the operation
completed. IPSSEND GETSTATUS controller
where controller is the ServeRAID controller number
(1–12).
Supported operating systems: Windows, NetWare,
OS/2, Linux, OpenServer, UnixWare, Open UNIX, and
DOS
rebuild This function rebuilds a defunct physical
drive. You can use this function for arrays
that contain one or more logical drives in
the critical state. IPSSEND REBUILD controller dch dsid nch nsid
where:
v controller is the ServeRAID controller number (1–12)
v dch is the channel number for the defunct drive (1–4)
v dsid is the SCSI ID for the defunct drive (0–15)
v nch is the channel number for the new drive (1–4)
v nsid is the SCSI ID for the new drive (0–15)
Supported operating systems: Windows, NetWare,
OS/2, Linux, OpenServer, UnixWare, Open UNIX, and
DOS
Chapter 8. Installing and using the IPSSEND command-line program
85