IBM ServeRAID, Справочник пользователя

Страница: 78 / 226

4. In the ServeRAID Manager tree, click the ServeRAID controller that you want to
configure as the passive controller.
5. Click ( Configure for clustering ) on the toolbar. The “Configure controller
2 for clustering” window opens.
6. Provide the following information:
Controller name
Type the name of the passive controller. This will be the same name as
you typed in step 9 on page 54, for example, Controller B.
Partner name
Type name of the active controller. This will be the same name as you
typed in step 9 on page 54, for example, Controller A.
Initiator IDs
The system presets these SCSI initiator IDs to 7. When configuring the
passive controller, do
not change these values. (The ServeRAID
Manager program does not permit you to select numbers other than 6
and 7.)
Notes:
a. The controller name and partner name are case sensitive.
b. If your configuration will contain multiple ServeRAID controller pairs, each
controller name must be unique.
7. Click OK .
8. Shut down the server.
Connecting the passive controller to the enclosure
Complete the following steps to connect the passive controller to the enclosure:
1. Connect the enclosure to the passive ServeRAID controller.
Notes:
a. Both the active and passive controller must be connected to the same
enclosure.
b. The enclosure bus cables must be connected to the same channel on each
controller. For example, the enclosure bus #1 cable is connected to Channel
1 on the active controller, and the enclosure bus #2 cable is connected to
Channel 1 on the passive controller
2. Restart the server.
Figure 29. “Configure controller 2 for clustering” window
62
IBM ServeRAID: User’s Reference, Version 5.10