IBM ServeRAID, Справочник пользователя

Страница: 72 / 226

5. Click the appropriate Array tab in the right panel; then, from the ready drives
list, select the drives that you want to move to the array.
6. Click ( Add selected drives ) to add the drives to an array. You can
click ( Add all drives ) to move all ready drives to an array.
7. Repeat steps 5 and 6 for each additional array that you want to configure.
Notes:
a. You must use all the ready drives when creating your arrays (that is, all
ready drives in the ServeRAID Manager tree must be online).
b. Hot-spare drives are not supported in a failover environment. The
exception is the built-in hot-spare that is part of a RAID level-5E logical
drive.
8. After you select the ready drives for your arrays, click Next . The “Create
logical drives” window opens.
Figure 23. “Create arrays” window
56
IBM ServeRAID: User’s Reference, Version 5.10