IBM ServeRAID, Справочник пользователя

Страница: 98 / 226

Function What it does Command
flashcopy
map This function lists the following information
for each operating-system partition:
v Partition number, letter, and size
v Logical drive number
v Array letter
v Whether the partition is available for
FlashCopy
Run the FlashCopy map command before
starting a FlashCopy backup or FlashCopy
nobackup procedure.
IPSSEND FLASHCOPY controller MAP
where controller is the ServeRAID controller number
(1–12).
If a partition is not available for FlashCopy, the report
contains one of the following explanatory notes:
Note 1 This is either an active FlashCopy link or
unavailable due to active FlashCopy links. See
the table below for details. Use the stop
function to break these links. After the link is
broken, you can reissue the FlashCopy backup
or FlashCopy nobackup functions.
Note 2 One or more of the following is true for this
partition:
v The partition is the boot partition.
v The partition does not have an NTFS or FAT
file system.
v The partition does not have a drive letter
assigned.
v
There is more than one partition defined on
this logical drive in the spanned array.
v
The partition has open files.
v The partition has a memory-paging file.
You can override these requirements by using
the force option. See the FlashCopy backup
and FlashCopy nobackup functions for more
details.
Note 3 One or more of the following is true for this
partition:
v The partition is in the blocked state.
v The partition is not in the okay or critical
state.
v
The partition is currently synchronizing,
rebuilding, or migrating.
Note 4 FlashCopy can support up to four active links
only.
Note 5 There is no partition defined on this logical
drive.
82
IBM ServeRAID: User’s Reference, Version 5.10