IBM ServeRAID, Справочник пользователя

Страница: 111 / 226

3. From the command-line prompt, type the following and press Enter:
serveraid:\netware\manager\install
The installation program starts.
4. Follow the instructions on the screen to install ServeRAID Manager.
Installing ServeRAID Manager on Red Hat Linux, SuSE Linux, Caldera
OpenLinux, or Turbolinux
Notes:
1. The ServeRAID Manager program comes with the IBM Java Runtime
Environment (JRE).
2. If the ServeRAID Manager program has previously been installed on your
server, you must remove that version before upgrading. All customization files
(such as Managed system tree nodes and the Notification list) are saved and
used in the upgrade. To remove the ServeRAID Manager program from Linux,
type the following command:
rpm --erase RaidMan
3. When installed on Linux, this version of the ServeRAID Manager program
supports up to eight ServeRAID controllers.
Complete the following steps to install the ServeRAID Manager program on Red
Hat Linux, SuSE Linux, Caldera Open Linux, or Turbolinux:
1. Insert the IBM ServeRAID Support CD into the CD-ROM drive.
2. If your CD-ROM drive automounts, type the following command and go to step
6. Otherwise, go to step 3.
rpm --install /mnt/cdrom/linux/manager/RaidMan-5.10.i386.rpm
3. If your CD-ROM drive does not automount, type the following and press Enter:
mount -r -t iso9660 /dev/ cdromdevicefile / mountpoint
where cdromdevicefile is the specific device file for the CD-ROM block device,
and mountpoint is the mountpoint of the Linux system.
4. Type the following and press Enter:
rpm --install / mountpoint /cdrom/linux/manager/RaidMan-4.80.i386.rpm
where mountpoint is the mountpoint of the device file used in step 3.
5. When the installation is complete, type the following:
umount / mountpoint
where mountpoint is the mountpoint of the Linux system.
6. Press Enter. You can now remove the CD from the CD-ROM drive.
Installing ServeRAID Manager on OS/2
Note: When installed on OS/2, this version of the ServeRAID Manager program
supports up to eight ServeRAID controllers.
Complete the following steps to install the ServeRAID Manager program on OS/2:
1. Insert the IBM ServeRAID Support CD into the CD-ROM drive.
2. Open an OS/2 command window.
Chapter 10. Installing and starting the ServeRAID Manager program
95