IBM ServeRAID, Справочник пользователя

Страница: 29 / 226

v Review the documentation provided with your operating system for
information concerning using these features.
v See “Using a ServeRAID controller in a server with Active PCI
features” on page 11.
2. If your server model does not support Active PCI, turn off the server and
disconnect all power cords and cables from the server.
Statement 5
CAUTION:
The power control button on the device and the power switch on the power supply do
not turn off the electrical current supplied to the device. The device also might have
more than one power cord. To remove all electrical current from the device, ensure
that all power cords are disconnected from the power source.
1
2
3. Remove the server cover and locate an empty PCI expansion slot for the
controller. Choose a slot that is farthest from other installed components, such
as the microprocessor. If necessary, see your server documentation for more
detailed information about the expansion slots.
Note: Some server models require that you install the ServeRAID controller in
a specific PCI slot. See the documentation that came with your server
for more information.
4. Remove the expansion-slot cover, if applicable.
5. Touch the static-protective package containing the controller to an unpainted
metal expansion-slot cover on the server. This discharges any static electricity
from the package and your body.
6. Holding the controller by the edges, remove it from the static-protective
package. Do not touch any exposed components on the controller.
7. Insert the controller into the PCI expansion slot. Press the controller firmly into
the slot so that it is fully seated.
Chapter 2. Installing and cabling a ServeRAID controller
13