IBM ServeRAID, Справочник пользователя

Страница: 132 / 226

b. Only one logical drive can be defined for each array.
c. A logical drive cannot exceed 2048 GB.
10. Click Next . The “Configuration summary” window opens.
11. Review the information that is displayed in the Configuration summary window.
Click Apply ; then, click Yes when asked if you want to apply the new
configuration. The configuration is saved in the ServeRAID controller and on
the physical drives.
12. Click Return to the ServeRAID Manager to continue working with your
ServeRAID configuration. After creating the arrays and logical drives, you must
assign merge-group numbers to the shared logical drives.
Note: A merge-group number uniquely identifies each shared logical drive,
even when the logical drive moves between servers.
13. In the ServeRAID Manager tree, click the ServeRAID controller that contains
the logical drives.
Notes:
a. Valid merge-group numbers for non-shared logical drives are 206 and 207.
For example, set all non-shared drives on Server A to merge-group number
206 and all non-shared drives on Server B to merge-group number 207.
b. The merge-group number must be unique for each logical drive that is
shared by the controller pair. For example, if you have a logical drive with a
merge-group number 1 on Server A, you cannot assign the same group
number to a logical drive on Server B. Valid merge-group numbers for
shared logical drives are from 1 through 8.
Figure 38. “Configuration summary” window
116
IBM ServeRAID: User’s Reference, Version 5.10