IBM SAN32M1, Инструкция по установке и обслуживанию

Страница: 451 / 626

419 Appendix A: Messages
Message
This feature has not been installed. Please contact your sales
representative.
Description
Indicator that the feature has not been installed on this director.
Action
Contact your sales representative to obtain the desired feature.
Message
This feature key does not include all of the features currently
installed and cannot be activated while the switch is online.
Description
The feature set currently installed for this system contains features
that are not being installed with the new feature key. To activate the
new feature key, you must set the switch offline. Activating the new
feature set, however, will remove current features not in the new
feature set.
Action
Set the switch offline through the Set Online State dialog box, then
activate the new feature key using the Configure Feature Key dialog
box.
Message
The switch did not accept the request.
Description
The switch did not handle the action.
Action
Try action again. If problem persists, contact your support
representative.
Message
The switch did not respond in the time allowed.
Description
A time out was reached waiting for the switch to respond to the
action.
Action
Try action again.