IBM SAN32M1, Инструкция по установке и обслуживанию

Страница: 178 / 626

SAN32M1 Fabric Switch Installation and Service Manual 146
— Percent traffic capacity utilized. This is the percent of the
port’s throughput capacity achieved by the measured
throughput. This setting constitutes the threshold value. For
example the value of 50 means that the port’s threshold is
reached when throughput is 50% of capacity.
— Time interval during which throughput is measured and alert
notification can occur.
— The time that the percentage of throughput capacity (%
utilization) must exist during the set time interval before an
alert generates.
• Ports for which you are configuring threshold alerts.
You can configure up to 16 alerts, and any number of alerts can be
active at one time.
Procedures
Use the following procedures to create a new threshold alert, or to
modify, activate, deactivate, or delete an alert.
Create new alert
1. Select Threshold Alerts from the Configure menu.
The Configure Threshold Alerts dialog box displays.
Figure 88
Configure threshold alerts dialog box
i32M1031