IBM SAN32M1, Инструкция по установке и обслуживанию

Страница: 117 / 626

85 Chapter 2: Installation tasks
5. At the Computer Name field, change the name to MGMTSERVER,
at the Workgroup field, change the name to WORKGROUP, then
click OK. The dialog box closes.
6. Record the computer and workgroup names for reference if the
management server hard drive fails and must be restored.
7. At the System Properties dialog box, click OK to close the dialog
box and return to the Control Panel window.
8. Click close (X) at the upper right corner of the Control Panel
window to return to the Windows 2000 desktop.
Configure gateway and DNS server addresses
To configure gateway addresses and DNS server IP addresses for
the private LAN connection (LAN 2) and optional public LAN
connection (LAN 1):
1. At the Windows 2000 desktop, click Start at the left side of the
task bar, then select Settings, then Control Panel. The Control Panel
window displays (
Figure 40 on page 83).
2. Double-click the Network and Dial-up Connections icon. The
Network and Dial-up Connections window displays ( Figure 43 ).
Figure 43
Network and dial-up connections window
3. To configure addresses for the private LAN connection (LAN 2),
double-click the Local Area Connection 2 icon. The Local Area
Connection 2 Status dialog box displays (
Figure 44 on page 86).
i24M1020