IBM SAN32M1, Инструкция по установке и обслуживанию

Страница: 256 / 626

SAN32M1 Fabric Switch Installation and Service Manual 224
A CTP card failure is indicated. Because the CTP card is not a FRU,
replace the switch
20
Does the SANpilot interface appear operational?
NO YES
↓
Go to step 22 .
21
A Page cannot be found, Unable to locate the server, HTTP 404 -
file not found, or other similar message appears. The message
indicates the web browser PC cannot communicate with the switch
because:
• The switch-to-PC Internet (Ethernet) link could not be
established.
• AC power distribution in the switch failed, or AC power was
disconnected.
• The switch CTP card failed.
Go to step 12 .
22
Inspect the power supply operational states at the SANpilot interface.
a. At the View panel, click the Component Properties tab. The View
panel (Component Properties tab) displays.
b. Inspect the State fields for Power Supply 0 and Power Supply
1.
Does the State field display a Failed or Not Installed message for
either power supply?
NO YES
↓
A redundant power supply failure is indicated. Go to step 6 .
The switch appears operational.
MAP 0200: POST, reset, or IPL failure analysis
When the switch is powered on, it performs a series of power-on
self-tests (POSTs). When POSTs complete, the switch performs an
initial program load (IPL) that loads firmware and brings the unit