IBM SAN32M1, Инструкция по установке и обслуживанию

Страница: 110 / 626

SAN32M1 Fabric Switch Installation and Service Manual 78
Figure 29
LCD panel (LAN 2 subnet mask)
6. Use the arrow keys as described in step 2 to input a new subnet
mask, then press ENTER. The following message appears
(
Figure 30 ):
Figure 30
LCD panel (save change)
7. Press ENTER. A Wait a moment! message appears at the LCD
panel, the LCD panel returns to the LAN 1 Setting?? message,
and the LAN 2 subnet mask changes.
8. Record the private LAN IP address and subnet mask for reference
if the management server hard drive fails and must be restored.
Configure public LAN Addresses (optional)
To optionally configure TCP/IP network information for the public
LAN connection (LAN 1):
1. At the management server’s LCD panel, press ENTER. The
Welcome!!
or operational information message changes to the
following ( Figure 31 ):
Figure 31 LCD panel (password entry)
2. Using the button to increment a digit, the button to
decrement a digit, the button to move the cursor left,
and the button to move the cursor right, input the default or
changed password, and press ENTER. The LAN 1 Setting??
message appears at the LCD panel.
Input Netmask:
255.000.000.000
Save Change?
Yes, Save !!
Input Password:
0****