IBM SAN32M1, Инструкция по установке и обслуживанию

Страница: 109 / 626

77 Chapter 2: Installation tasks
Configure private LAN addresses
To configure TCP/IP network information for the private LAN
connection (LAN 2):
1. At the management server’s LCD panel, press ENTER. The
Welcome!!
or operational information message changes to the
following ( Figure 26 ):
Figure 26 LCD panel (password entry)
2. Using the button to increment a digit, the button to
decrement a digit, the button to move the cursor left,
and the button to move the cursor right, input the default or
changed password, and press ENTER. The LAN 1 Setting??
message appears at the LCD panel.
3. Press the button. The LAN 2 Setting?? message appears at the
LCD panel. Press ENTER and the following message appears
(
Figure 27 ) with the default IP address of 10.1.1.1.
Figure 27 LCD panel (LAN 2 IP address)
4. Use the arrow keys as described in step 2 to input a new IP
address, then press ENTER. The following message appears
(
Figure 28 ):
Figure 28 LCD panel (save change)
5. Press ENTER. The LAN 2 IP address changes and the following
message appears ( Figure 29 ) with the default subnet mask of
255.0.0.0 .
Input Password:
0****
Input IP:
010.001.001.001
Save Change?
Yes, Save !!