IBM SAN32M1, Инструкция по установке и обслуживанию

Страница: 108 / 626

SAN32M1 Fabric Switch Installation and Service Manual 76
Configure Password
To configure a new LCD panel password:
1. At the management server’s LCD panel, press ENTER. The
Welcome!! or operational information message changes to the
following ( Figure 23 ):
Figure 23
LCD panel (password entry)
2. Using the button to increment a digit, the button to
decrement a digit, the button to move the cursor left,
and the button to move the cursor right, input the default
password (9999), and press ENTER. The LAN 1 Setting??
message appears at the LCD panel.
3. Press the button several times until the Change Password?
option appears at the LCD panel, then press ENTER. The
following message appears (
Figure 24 ):
Figure 24
LCD panel (new password)
4. Use the arrow keys as described in step 2 to input a new 4-digit
numeric password, then press ENTER. The following message
appears (
Figure 25 ):
Figure 25
LCD panel (save change)
5. Press ENTER. A Wait a moment! message appears at the LCD
panel, the LCD panel returns to the LAN 1 Setting?? message,
and the password changes.
Input Password:
0****
New Password:
0****
Save Change?
Yes, Save !!