IBM SAN32M1, Инструкция по установке и обслуживанию

Страница: 167 / 626

135 Chapter 2: Installation tasks
a. Select a blank Name field and type a descriptive port name of
24 or fewer alphanumeric characters. Use a name that reflects
the device connected to the port.
b. Click the Blocked check box to block or unblock a port. A check
mark in the box indicates the port is blocked. Blocking the port
prevents the attached device from communicating with the
switch. A blocked port continuously transmits the offline
sequence (OLS).
Figure 80
Configure ports dialog box (open systems management style)
c. Click the 10-100 km check box to enable extended distance
buffering for a port. A check mark in the box indicates
extended distance operation up to 100 kilometers (through
repeaters) is enabled.
d. Click the LIN Alerts check box to enable or disable LIN alerts
for a port. A check mark in the box indicates alerts are enabled.
When the feature is enabled and an incident occurs on the link,
an alert indicator (yellow triangle) displays at the Hardware
View, Port List View, and Port Card View, and a message is sent
to configured e-mail recipients. LIN alerts are enabled by
default.
e. Select a Type field and choose generic port (G_Port), fabric port
(F_Port), or expansion port (E_Port) from the list box.
i32M1023