IBM SAN32M1, Инструкция по установке и обслуживанию

Страница: 344 / 626

SAN32M1 Fabric Switch Installation and Service Manual 312
— SFP - Small form factor pluggable (SFP) optical transceiver.
Chassis slots for SFPs inserted in a port are 0 through 31 . SFPs
are FRUs.
— PWR - power supply. Chassis slots for redundant power
supplies are 0 and 1. Power supplies are FRUs.
— FAN - cooling fan. Chassis slots for redundant fans are 0
through
3
. Fans are FRUs.
— CTP - control processor (CTP) card. The chassis slot is 0. The
CTP card is not a FRU.
— THM - thermal sensor. The chassis slot is 0. The thermal
sensor is not a FRU.
• Event Data - up to 32 bytes of supplementary event data (if
available for the event) in hexadecimal format. Refer to Appendix
, " Event code tables "for an explanation of the supplementary event
data.
Refresh the event
log
To ensure recently-created events appear in the Event Log,
periodically refresh the log display. This is particularly important
when inspecting the log for informational event codes to verify a
repair procedure. To refresh the log, click Refresh at the bottom of the
log window.
Clear the event log
To ensure the Event Log is up-to-date and not filled with archived
events, periodically clear the log display. To clear the log, click Clear
at the bottom of the log window.
Hardware log
The Hardware Log ( Figure 174 ) displays a history of FRU removals
and replacements (insertions) for the switch. The information is
useful to maintenance personnel for fault isolation and repair
verification