IBM Power Systems Series Скачать руководство пользователя страница 28

Страница: 28 / 134

Table 4. Network adapter problems and service actions (continued)
Problem

Service action

Adapter suddenly stops working

1. If the system was recently installed, moved,

serviced, or upgraded, verify that the adapter is

seated properly and all associated cables are

correctly connected.

2. Inspect the PCIe socket and verify that there is

no dirt or debris in the socket.

3. Inspect the card and verify that it is not

physically damaged.

4. Verify that all cables are properly seated and

are not physically damaged. If you recently

added one or more new adapters, remove them

and then test to determine whether the failing

adapter is functioning properly again. If the

network adapter is functioning again, review the

IBM support tips to confirm that there are no

PCI address, driver, or firmware conflicts. Then,

reinstall the new adapters again one at a time

until all adapters function properly.

5. Replace the adapter.
6. If the adapter is connected to a PCIe riser,

replace the PCIe riser.

7. If the adapter is in UIO slot 1, UIO slot 2, or UIO

slot 3, replace CPU 1. Otherwise, replace CPU 2.

8. Replace the system backplane.

Link indicator light on the adapter is off

1. Verify that the cable functions properly by

testing it with a known working connection.

2. Verify that the port or ports on the switch are

enabled and functional.

3. Verify that the switch and adapter are

compatible.

4. Replace the adapter.

Link light on the adapter is on, but there is no

communication from the adapter

1. Verify that the most recent driver is installed, or

install the most recent driver if it is not already

installed.

2. Verify that the adapter and its link have

compatible settings, such as speed and duplex

configuration.

Содержание Power Systems Series







































































































































Результаты поиска

Содержание Power Systems Series

Отзывы:

Похожие инструкции для Power Systems Series

Бренды по названию

Популярные бренды

IBM Power Systems Series, Анализ проблем, составные части системы и расположение

Результаты поиска

Содержание Power Systems Series

Отзывы:

Похожие инструкции для Power Systems Series

Бренды по названию

Популярные бренды