IBM Power Systems Series Скачать руководство пользователя страница 22

Страница: 22 / 134

a. Ensure that a problem does not exist with the connection to the network location.

b. Ensure that the adapter has a valid IP address for the network.

c. Replace the network adapter.

• If your system is a 5104-22C or 9006-22C, go to “5104-22C or 9006-22C locations” on page

63 to identify the physical location and the removal and replacement procedure.

• If your system is a 9006-12P, go to “9006-12P locations” on page 75 to identify the physical

location and the removal and replacement procedure.

• If your system is a 9006-22P, go to “9006-22P locations” on page 91 to identify the physical

location and the removal and replacement procedure.

4. Petitboot displays all recognized bootable images to use by default. Is the boot image recognized by

Petitboot?

Then

Yes:

Continue with step “10” on page 9.

No:

Select the Petitboot menu option to refresh the boot images. If the problem persists,

continue with the next step.

5. To determine the command to type on the Petitboot command line to verify that the boot drive is

recognized and in optimal status, use Table 1 on page 8.

Table 1. Determine the command to verify that the boot drive is recognized and in optimal status
Boot drive configuration

Commands

Virtual drive connected directly to the system

backplane

arcconf getconfig 1 LD

Physical drive connected directly to the system

backplane

arcconf getconfig 1 PD

Is the boot drive recognized and in optimal status?

Then

Yes:

Reinstall the operating system on the boot drive. This ends the procedure.

No:

Continue with the next step.

6. Are the drives properly seated in their respective drive bays?

Note:
• If your system is a 5104-22C or 9006-22C, go to “5104-22C or 9006-22C locations” on page 63

to identify the physical location and the removal and replacement procedure.

• If your system is a 9006-12P, go to “9006-12P locations” on page 75 to identify the physical

location and the removal and replacement procedure.

• If your system is a 9006-22P, go to “9006-22P locations” on page 91 to identify the physical

location and the removal and replacement procedure.

Then

Yes:

Continue with the next step.

No:

Properly seat the drives in the drive bays. Then, go to step “4” on page 8.

7. Refresh the Petitboot boot options. Is the boot image on the boot drive recognized?

Then

Yes:

Boot the operating system. Then, continue with step “10” on page 9.

No:

Continue with the next step.

8 Power Systems: Problem analysis, system parts, and locations for the 5104-22C, 9006-12P, 9006-22C, and

9006-22P

Содержание Power Systems Series







































































































































Результаты поиска

Содержание Power Systems Series

Отзывы:

Бренды по названию

Популярные бренды

IBM Power Systems Series, Анализ проблем, составные части системы и расположение

Результаты поиска

Содержание Power Systems Series

Отзывы:

Бренды по названию

Популярные бренды