IBM Power Systems Series Скачать руководство пользователя страница 64

Страница: 64 / 134

• If your system is a 9006-12P, go to “9006-12P locations” on page 75 to identify the physical

location and the removal and replacement procedure.

• If your system is a 9006-22P, go to “9006-22P locations” on page 91 to identify the physical

location and the removal and replacement procedure.

• If the sensor name is CPU Func 1 or CPU Core Func x, where x is 1 - 12, replace system processor

CPU 1.

• If the sensor name is CPU Func 2 or CPU Core Func x, where x is 13 - 24, replace system processor

CPU 2.

Does the problem persist?

Then

Yes:

Replace the system backplane. If the replacement of the system backplane does not

resolve the problem, go to “Contacting IBM service and support” on page 61. This

ends the procedure.

No:

This ends the procedure.

EPUB_PRC_SP_CODE isolation procedure

A problem was detected in the system firmware.

About this task
Update the system firmware image. Go to Getting fixes and update the system firmware with the most

recent level of firmware. Then, reboot the system. If the system firmware update does not resolve the

problem, go to “Contacting IBM service and support” on page 61. This ends the procedure.

EPUB_PRC_PHYP_CODE isolation procedure

A problem was detected in the system firmware.

About this task
Update the system firmware image. Go to Getting fixes and update the system firmware with the most

recent level of firmware. Then, reboot the system. If the system firmware update does not resolve the

problem, go to “Contacting IBM service and support” on page 61. This ends the procedure.

EPUB_PRC_ALL_PROCS isolation procedure

A problem was detected with a system processor.

About this task
Use the following table to determine the service action:

50 Power Systems: Problem analysis, system parts, and locations for the 5104-22C, 9006-12P, 9006-22C, and

9006-22P

Содержание Power Systems Series







































































































































Результаты поиска

Содержание Power Systems Series

Отзывы:

Бренды по названию

Популярные бренды

IBM Power Systems Series, Анализ проблем, составные части системы и расположение

Результаты поиска

Содержание Power Systems Series

Отзывы:

Бренды по названию

Популярные бренды