manualshive.com logo in svg

IBM Power Systems Series, Анализ проблем, составные части системы и расположение

Поделиться
Скачать
IBM Power Systems Series Скачать руководство пользователя страница 16

If

Then

No:

Go to “Resolving a power problem” on page 5.

2. Can you access the baseboard management controller (BMC) across the network?

If

Then

Yes:

Continue with the next step.

No:

Go to “Resolving a BMC access problem” on page 2.

3. Can you boot the system to the Petitboot menu?

If

Then

Yes:

Continue with the next step.

No:

Go to “Resolving a system firmware boot failure” on page 5.

4. Is video displayed on the video graphics array (VGA) monitor?

If

Then

Yes:

Continue with the next step.

No:

Go to “Resolving a VGA monitor problem” on page 7.

5. Can you start the operating system?

If

Then

Yes:

Continue with the next step.

No:

Go to “Resolving an operating system boot failure” on page 7.

6. On the sensor readings GUI display, are any sensors red?

If

Then

Yes:

Go to “Resolving a sensor indicator problem” on page 9.

No:

Continue with the next step.

7. Go to “Resolving a hardware problem” on page 10. This ends the procedure.

Resolving a BMC access problem

Learn how to identify the service action that is needed to resolve a baseboard management controller

(BMC) access problem.

Procedure

1. Ensure that the BMC password is not set to the default password. For information about changing the

default password, see Logging on to the BMC GUI. Does the problem persist?

If

Then

Yes:

Continue with the next step.

No:

This ends the procedure.

2. Are both ends of the network cable seated securely?

If

Then

Yes:

Continue with the next step.

No:

Seat both ends of the cable securely. If the problem persists, continue with the next

step.

2  Power Systems: Problem analysis, system parts, and locations for the 5104-22C, 9006-12P, 9006-22C, and

9006-22P

Содержание Power Systems Series







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды