IBM IntelliStation A Pro 6217, Руководство по обслуживанию

Страница: 120 / 188

Statement 2:
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or
an equivalent type battery recommended by the manufacturer. If your
system has a module containing a lithium battery, replace it only with the
same module type made by the same manufacturer. The battery contains
lithium and can explode if not properly used, handled, or disposed of.
Do not:
– Throw or immerse into water
– Heat to more than 100°C (212°F)
– Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
To install the battery, complete the following steps:
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 79.
2. Follow any special handling and installation instructions that come with the
replacement battery.
3. Turn off the computer and all attached devices. Disconnect all external cables
and power cords; then, remove the computer cover and the support bracket
(see “Removing the side cover” on page 81 and “Removing the support bracket”
on page 83).
4. Insert the new battery:
a. Tilt the battery so that you can insert it into the socket on the side opposite
the battery clip.
b. Press the battery down into the socket (Figure 23) until it clicks into place.
Make sure that the battery clip holds the battery securely.
5. Replace the support bracket (see “Removing the support bracket” on page 83).
6. Replace the cover and connect the cables.
7. Turn on the computer.
8. Start the Configuration/Setup Utility program and set configuration parameters.
v
Set the system date and time.
v Set passwords if necessary.
v
Save the configuration.
Figure 23. Installing the battery
104
IBM IntelliStation A Pro Type 6217: Problem Determination and Service Guide