IBM 7163, Руководство по диагностике и обслуживанию

Страница: 65 / 210

Air baffle
Attention: To avoid breaking the DIMM retaining clips or damaging the DIMM
connectors, open and close the clips gently.
7. Open the retaining clip on each end of the DIMM connector and remove the
DIMM from the connector.
8. If you are instructed to return the DIMM, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Replacing a DIMM
The server supports 667 MHz, 1.8 V, 240-pin, PC2-5300 single-ranked or
dual-ranked double data-rate (DDR) II, registered synchronous dynamic
random-access memory (SDRAM) with error correcting code (ECC) DIMMs. These
DIMMs must be compatible with the latest PC2-5300 SDRAM Registered DIMM
specifications. For a list of the supported options for the server, see
http://www.ibm.com/servers/eserver/serverproven/compat/us/.
DIMMs must be installed in pairs of the same type and speed.
To install the replacement DIMM, complete the following steps:
1. Open the retaining clip on each end of the DIMM connector.
2. Touch the static-protective package that contains the DIMM to any unpainted
metal surface on the server. Then, remove the DIMM from the package.
Chapter 4. Removing and replacing server components
49