IBM 2274, Руководство пользователя

Страница: 77 / 152

Using the Setup Utility
73
Setup Utility
Your IBM Personal Computer comes ready to use. You
can use the Setup Utility and the Windows Device
Manager to view your computer’s configuration
settings.
You can also use the Setup Utility to change some
configuration settings. If you add or replace hardware
inside your computer, you might need to verify or
update specific settings.
This chapter contains instructions for how to use the
Setup Utility. If you need additional information about
the Setup Utility options, see the Setup Utility help.
Using the Setup Utility
The Setup Utility lets you view and change configuration
settings for hardware installed in your computer. You
might need to use the Setup Utility if you upgrade the
hardware in your computer or if you get an error
message while using your computer.
Automatic changes
In most cases, your computer’s Basic Input/Output
System (BIOS) can make changes automatically. When
you install new hardware, the BIOS detects it during the
Power-On Self-Test (POST) and automatically updates
the Setup Utility.
Manual changes
In some cases, your computer will not make changes
automatically. For example, if you install hardware that
does not meet Plug and Play requirements, you will
need to start the Setup Utility and make changes
manually.