IBM 2274, Руководство пользователя

Страница: 114 / 152

110
Adding and removing adapter cards
6 Except for the original slot cover, reinstall all hardware
and screws you removed prior to the installation of
the adapter card. Save the original slot cover to use
again in case you remove the adapter card.
7 If the adapter card came with one or more cables,
connect the cables to the correct connectors on the
system board or drive. If you disconnected any cables
to gain access to the adapter card connector on the
system board, reconnect the cables.
8 Reinstall the cover and reconnect the cables to the
back of the system unit. Then, reconnect the power
cord to the back of the system unit and plug the other
end of the cord into a properly grounded electrical
outlet.
If after you turn on your computer you receive a
message asking you to insert the Windows CD to
search for the required files, then search for these files
in the C:\Windows\Options\Cabs directory on your hard
drive instead.
To remove an adapter card:
1 Position the system unit so that the card is accessible
to you.
2 If the adapter card has cables, disconnect them. Be
sure to take note of where the cables are connected.
You will have to reconnect these cables when you
reinstall the card.
3 Remove the adapter card screw.
4 Firmly hold the adapter card and carefully pull it from
the card connector.
5 If you are not reinstalling the card, reinstall all
hardware and screws you removed prior to the
removal of the adapter card.