IBM 2274, Руководство пользователя

Страница: 67 / 152

Responding to error codes
63
Troubleshooting
1762
Onboard IDE Channel
Address Conflict(s)
1 Remove all the add-on cards in the system.
2 Power on the system to see if it works without the
cards.
3 Reinstall the cards one by one to determine which of
the cards caused the error.
4 After determining the defective card or cards, enter
the Setup Utility and set the Reset Resource
Assignments parameter setting to
Yes , then reboot
the system.
5 If the problem still shows, set the Onboard IDE
Primary/Secondary Channel parameter to
Disabled ,
then reboot the system.
For information on using the Setup Utility, see
“Starting the Setup Utility” on page 74.
1780
IDE Primary Channel
Master Drive Error
1 Make sure the IDE signal cable is properly connected
to the drive and to the system board.
2 Make sure the drive power cable is properly
connected.
3 Enter the Setup Utility and make sure that the IDE
Primary Channel Master parameter setting is set to
Auto . For information on the Setup Utility options, see
the Setup Utility help.
4 If the error still shows after performing the above
steps, the IDE drive may be defective. For information
on using the Setup Utility, see “Starting the Setup
Utility” on page 74.
Error code and description Here’s what to do...
If any of these problems continue after taking the actions
listed, run the diagnostics programs that came with your
computer. If you need service, see “HelpWare support and
services” on page 81.