Install Hy5B Vehicle Detectors
Install one Hy5B detector at a time. Each vehicle detector socket is labeled.
1. Turn power OFF in control box.
2. Insert the squared-off end of the plastic standoff
through the hole in the Hy5B detector.
NOTE:
The plastic standoff “squared-off end” does not fit
into the mounting holes of the control box. Double check
the orientation of squared-off ends.
3.
To minimize excessive flexing, keep each Hy5B
perpendicular to the control board as you plug it
into the Hy5B socket.
4. Secure the Hy5B by inserting each plastic
standoff into the chassis.
5. Place the two wires from the loop into the push terminals of the Hy5B. For ease of installation, the wire
gauge should be 20 - 14 AWG. Refer to
Vehicle Loop Sets on page 46
.
NOTE:
If you have more Hy5B detectors, repeat the steps 2 through 4 for each additional Hy5B detector.
SmartDC Control Box
Power switches
Turn off both the DC and AC switches.
Smart Touch Control Box
Power toggle switch
Hy5B vehicle detector
Plastic standoff
LED Display Status
LED Activity Indicates
Condition & Resolution
OFF
Hy5A mode
Emulation mode. Some Hy5B features are
unavailable.
GREEN
PULSING Heart beat
Normal operation.
RED
ON
Call Mode
Status indicates loop activation in process.
RED
FLASHING
View display
for more
information:
Initializing
or
Faulty loop
If initializing, wait until initialization is
complete.
If flashing during loop operation, take
following steps:
1. Check loop wiring. See
Test the Vehicle
Loop on page 45
.
2. Replace loop.
3. If loop is not at issue, swap out
Hy5B vehicle detector with a known
operational Hy5B.
4. If necessary, replace Hy5B.
Vehicle Loop Sets
Loop Type
Installer Menu Loops Smart DC
Loops Smart Touch
Description
Exit Loop
ELD
EXIT LOOP
FREE EXIT
Opens a fully-closed gate.
Inside Reversing Loop
ILD
INSIDE
OBSTRUCTION
INSIDE OBSTR
Connects to the inside reversing loop.
Outside Reversing Loop
OLD
OUTSIDE
OBSTRUCTION
OUTSIDE OBSTR
Connects to the outside reversing loop.
Reset/Shadow/Center
SLD/CLD
CENTER LOOP
SHADOW / RESET
Prevents a gate from starting open or closed when a
vehicle is in the path of the gate.
5. Turn power to the gate operator back ON.
6.
The Hy5B indicator light flashes red and the following appears.
Smart Touch 7-segment
Display
STC (OLED) and Smart DC Displays
InIt
INITIALIZING
46
MX3650-01 Rev. D
StrongArmPark DC Programming & Operations
© 2017
www.hysecurity.com
