101
I/O Setting
Input Setting
The IP camera supports both input and output operations. When the input
condition is triggered, the relay will be also triggered & a notification will be
sent depending what checkboxes are ticked.
Log:
Tick
Save to SD card
to enable the
you would like to save data with.
Subject:
Input & edit the message you would receive for triggered alarm.
Interval:
For example, if you select "10 sec" here, once the motion is detected
and action is triggered, it cannot be triggered again within 10 seconds.
Based on the schedule:
Tick its checkbox to assign timetable from
Once the option is activated, only during the selected schedule time the I/O is
enabled. Assign the
Profile
timetable selected from the drop-down list first.
Содержание HQZ-1WKDA
