Hunt HQZ-1WKDA, Руководство пользователя

Страница: 128 / 135

114
II. I/O Setup
Enter
I/O Setting
via internet browser & check
Out1
to enable I/O signal.
Input Setting
The IP Cam supports both input and output operations. When the input
condition is triggered,
the relay will be also triggered & a notification will be
sent depending what checkboxes are ticked.
 Log: Tick Save to SD card checkbox to enable Log which you would like to save
data with.
 Subject: Input or edit the message you would like to receive for triggered alarm.
 Interval: If you select "10 sec" here, once the motion is detected and action is
triggered, it cannot be triggered again within 10 seconds.

Based on the schedule: Tick its checkbox to assign the timetable from Schedule
of the Event Menu. Please refer to Schedule from Event List .
Click on the underlined schedule title to enter to the schedule setup menu.
Output Setting
The output mode affects the DO or relay out duration.