manualshive.com logo in svg

HP Vectra VE4, Руководство пользователя

Поделиться
Скачать
HP Vectra VE4 Скачать руководство пользователя страница 10

 HP Vectra PC User's Guide

1  Setting Up Your PC  

••

  10

Connecting the Power Cables

1. If fitted, remove the label covering the computer’s power connector.

2. Connect the power cables to the display and computer. (The connectors are shaped to

go in one way only.)

3. Connect the display’s power cable and the computer’s power cable to a grounded

outlet.

WARNING

For your safety, always connect the equipment to a grounded wall outlet.
Always use a power cable with properly grounded plugs, such as the one
provided with this equipment, or one in compliance with your national
regulation. This PC has been designed to operate on all power systems,
including ‘IT’ power systems. It is disconnected from the power by removing the
power cable from the power outlet. This means the PC must be located close
to an easily accessible power outlet.

Содержание Vectra VE4














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды