HP StorageWorks 2/16 - SAN Switch, Руководство пользователя

Страница: 171 / 250

Fabric OS reference guide
171 Fabric OS 3.x Document Addendum
rstatd
Dynamically enables or disables a server that returns information through remote procedure
calls (RPCs) about system operation. The protocol provides for a wide range of system
statistics; however, only the Ethernet interface statistics (see
ifshow
) and system up time
(see
uptime
) are supported.
The retrieval of this information is supported by a number of operating systems that support
RPC. On most UNIX-based systems (HP-UX, Irix, Linux, Solaris, and so forth), the
commands to retrieve the information are rup and rsysinfo. Refer to your local system
documentation for the appropriate usage of the
rup
,
rsysinfo
, or equivalent commands.
rusersd
Dynamically enables or disables a server that returns information via remote procedure calls
(RPC) about the user logged into the system. The information returned includes the user login
name, the system name, the login protocol or type, login time, idle time, and remote login
location (if applicable).
The retrieval of this information is supported by a number of operating systems that support
RPC. On most UNIX-based systems (HP-UX, Irix, Linux, Solaris, and so forth), the command
to retrieve the information is rusers. Refer to your local system documentation for the
appropriate usage of the
rusers
or equivalent command.
rapid
Dynamically enables or disables API service.
thad
Dynamically enables or disables Fabric Watch service.
Disable RLS Probing
Enables or disables FCP RLS (read link state) information probing for an F/FL_Port. It is
disabled by default.
Portlog Events Disable and Enable Settings
Use this setting to disable logging port events. The default is on (enabled). When disabled, this
event is not logged by port log.
rapid Boolean 1 0 or 1
thad Boolean 1 0 or 1
Disable RLS Probing Boolean 1 0 or 1
Table 19: System Services Settings (Continued)
Field Type Default Range