Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 10, 2020
Product Diagram (MONSTADQI)
Component
Function
1
Stand Top with
Integrated Qi Charger
• 23.6 x 9.8 inches (600 x 250 mm) surface area
• Holds a
Monitor
, a
Mobile Device with
Wireless Charging Capabilities
, and a
Notebook/Paper Documents
2
Legs
• Adjustable height:
• Legs folded down - 3.3 inches (83.5 mm)
• Legs folded up - 4.5 inches (115.5 mm)
3
Qi Charger
• 15W Charging for
a
Mobile Device with
Wireless Charging Capabilities
4
Power Cable
• Connect the
Power Adapter
(included) to
provide power to the
Qi Charger
Requirements
For the latest requirements and full manual, please visit:
www.startech.com/MONSTADQI
.
• Mobile Device with Wireless Charging Capabilities x 1
• Clean, Flat, and Stable Surface
Installation
Assembling the Monitor Riser
1. Determine the desired height for the
Stand Top
.
Monitor Riser with Integrated Qi Charging Pad
2. (Optional -- Increase the height of the
Monitor Riser Legs
) Rotate the
Height
Adjustment Arms
found on the sides of the
Legs
out and up. The
Height
Adjustment Arms
pivot from a single point in the
Legs
. Ensure all four
Height
Adjustment Arms
have been fully rotated out and up before proceeding to the next
step.
(Figure 1)
3. Place the
Stand Top
, top side down, onto a
Clean, Flat, and Stable Surface
.
4. Align the two
Pegs
on one of the
Legs
with the two
Holes
in the
Stand Top.
(Figure 2)
5. Firmly press the two
Pegs
on one of the
Legs
into the two
Holes
in the
Stand Top.
6. Repeat steps 4-5 to install the second
Leg
.
7. Flip the
Monitor Riser Assembly
upright and position it on a
Clean, Flat, and
Stable Surface
for use.
8. Connect the
Power Adapter
to the
Power Cable
and to an available
Power Source
.
1
2
4
3
Figure 1
Figure 2
Pegs
