MF002LM
1
2
3
Dual Monitor Desk Mount
75x75\100x100
VESA Plate
A (x2)
Arm
B (x1)
V-Shape Base
C (x1)
Pole
D (x1)
Pole Cover
E (x1)
Tool Holder
F (x1)
Nut
G (x2)
M3x7 Bolt
H (x2)
M6x13 Bolt
I (x3)
Allen Key 4mm
J (x1)
Allen Key 6mm
K (x1)
Allen Key 5mm
L (x1)
M4x12 Bolt
M-A (x8)
M4x16 Bolt
M-B (x8)
M5x12 Bolt
M-C (x8)
M5x16 Bolt
M-D (x8)
D5 Washer
M-E (x8)
Spacer
M-F (x8)
D
E
Press Pole Cover
E
into the top of Pole
D
.
Install the Pole
D
to the V-Shape Base
C
using M6x13 Bolts
I
and tighten with
Allen Key 4 mm
J
.
Put the Tool Holder
F
and Arm
B
through the Pole
D
, adjust the preferred height and tighten using
Allen Key 6mm
K
.
INSTALLATION MANUAL
1-844-SATTLER (18447288537)
www.walielectric.com
(8kg/17.6lbs)x2
RATED
MAX 27”
Supplied Parts List
I
J
D
C
K
D
F
B
WARNING
！
！
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.
SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
TIPOVER WARNING
● NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
● USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL.
