HP StorageWorks 2/16 - SAN Switch, Руководство пользователя

Страница: 135 / 250

Fabric OS procedures user guide
135 Fabric OS 3.x Document Addendum
2. Issue the following command:
userConfig ”--delete name“
where
name
Specifies the account name. You cannot delete the default accounts. An
account cannot delete itself. All active CLI sessions for the deleted account are logged out.
3. At the prompt for confirmation, enter
y
.
To change account parameters:
Note: Accounts with the admin role can change information for all accounts with lower permission
on the logical switch. Accounts with the user role cannot.
1. Connect to the switch and log in as admin.
2. Enter the following command:
userConfig ”
--
change username [-r rolename] [-d description] [-e yes | no]
“
To recover user-defined accounts:
If a backup account exists (in secure mode), you can recover it with the following command:
userConfig ”--recover“
The following conditions apply to recovering user accounts:
■
Only accounts with admin or higher roles can recover accounts.
■
The attributes in the backup database replace the attributes in the current account database.
■
An event is stored in the system message log, indicating that accounts were recovered.
where:
username
Changes the account attribute for username. The account
must already exist on the switch.
-r rolename
Is an option that changes the role: either admin or user in
nonsecure mode; admin, user, or nonfcsadmin in secure
mode.
An account cannot change its own role.
You can change the role name only of a user-defined account
with a lower level of authorization.
-d description
Is an optional account description. The description field can
contain up to 40 printable ASCII characters. The following
characters are not allowed: asterisk (*), quotation mark (“),
exclamation point (!), semicolon (;), and colon (:).
You can change the description only of a user-defined
account with a lower level of authorization.
-e
Is an option; enter
yes
to enable the account or
no
to
disable it. If you disable an account, all active CLI sessions
for that account are logged out. You can enable or disable
user-defined or default accounts.