HP StorageWorks 2/16 - SAN Switch, Руководство пользователя

Страница: 93 / 250

Diagnostic and system error messages reference guide
93 Fabric OS 3.x Document Addendum
DIAG-ERRSTAT (DISCC3)
Message
Probable Cause
The Port Error Statistics counter is nonzero, which means that a
Discarded Class 3
frames
error was detected when receiving frames. This can be caused by a faulty cable or
deteriorated SFP. It can also indicate more serious problems in the motherboard or ASIC. This
message is generated by the
portloopbacktest
or
spinsilk
command. The
error
code
value is for internal use only.
Recommended Action
Check for a faulty cable or deteriorated SFP. Replace the cable or SFP if necessary. If the
problem persists:
■
For the SAN Switch 2/16, replace the motherboard FRU.
■
For the SAN Switch 2/8 EL, replace the entire switch.
Severity
CRITICAL
DIAG-ERRSTAT (ENCIN)
Message
Probable Cause
The Port Error Statistics counter is nonzero, which means that an
Encoding error,
inside frame
error was detected when receiving frames. This can be caused by a faulty
cable or deteriorated SFP. It can also indicate more serious problems in the motherboard or
ASIC. This message is generated by the
portloopbacktest
or
spinsilk
command.
The
error code
value is for internal use only.
<timestamp>
CRITICAL DIAG-ERRSTAT (DISCC3), 1, <test name>, pass <number>,
Pt<port information> DiscC3 Error Counter is <number> sb 0,
Err# <error code>
<timestamp>
CRITICAL DIAG-ERRSTAT (ENCIN), 1, <test name>, pass <number>,
Pt<port information> Enc_in Error Counter is <number> sb 0,
Err# <error code>