HP NonStop RDF Скачать руководство пользователя

Страница: 320 / 478

Recovery

This is an informational message; no recovery is required.

Lockstep Gateway Started.

Cause

The lockstep gateway is started.

Effect

The lockstep gateway continues its initialization activity.

Recovery

This is an informational message; no recovery is required.

RDF extractor procname responded with error errnum to lockstep request.

procname

is the name of an extractor process.

errnum

is a file-system error number.

Cause

While the extractor is processing a lockstep request, the gateway stops, has been

restarted by SCF, and has sent a new lockstep request to the extractor.

Effect

The lockstep gateway stops.

Recovery

SCF automatically restarts the gateway. If the problem persists and the autorestart

count is exhausted, wait 30 seconds and then restart the gateway again.

Lockstep transaction aborted with error errnum.

errnum

is a file-system error number.

Cause

The specified error was encountered on a lockstep transaction.

Effect

If the error is retryable, the lockstep gateway starts a new transaction. If the error is

unexpected, the gateway stops.

Recovery

This is an informational error, unless the gateway stops. If it stops, correct the

condition that caused the error and then restart the gateway.

ENDTRANSACTION error errnum encountered on lockstep transaction.

errnum

is a file-system error number.

Cause

The specified error was encountered on ENDTRANSACTION.

Effect

If the error is retryable, the lockstep gateway starts a new transaction. If the error is

unexpected, the gateway stops.

Recovery

This is an informational error, unless the gateway stops. If it stops, correct the

condition that caused the error and then restart the gateway.

Invalid process name: procname for the RDF master extractor.

procname

is the invalid process name.

Cause

In your SCF script for starting the lockstep gateway, the process name specified in

the STARTUPMSG attribute was not a valid process name for the RDF master extractor.

Effect

The lockstep gateway stops.

320

Process-Lockstep Operation

Содержание NonStop RDF































































































































































































































































































































































































































































































Результаты поиска

Содержание NonStop RDF

Отзывы:

Похожие инструкции для NonStop RDF

Бренды по названию

Популярные бренды

HP NonStop RDF, Руководство по управлению

Результаты поиска

Содержание NonStop RDF

Отзывы:

Похожие инструкции для NonStop RDF

Бренды по названию

Популярные бренды