HP NonStop RDF, Руководство по управлению

Страница: 225 / 478

CPUS
primary-CPU
:
backup-CPU
identifies the CPUs in which the monitor process is to run as a process pair on the primary
system;
primary-CPU
is the primary CPU;
backup-CPU
is the backup CPU. Values range
from 0 through 15. The defaults are 0:1.
PRIORITY
priority
identifies the execution priority for the monitor process;
priority
is the execution priority,
from 10 through 199. The default priority is 165.
PROCESS
process-name
identifies the process name for the monitor process;
process-name
is any unique, valid
process name of up to six characters; the first character must be a dollar sign ($). You cannot
specify any of the reserved process names listed in the Guardian Procedure Calls Reference
Manual.
This parameter is not optional. You must explicitly name the monitor process.
Where Issued
Primary system only.
Security Restrictions
None.
RDF State Requirements
None.
Usage Guidelines
The SET MONITOR command enters the parameter values specified for the monitor in this
command into the RDF configuration table in memory. This table serves as an input buffer only,
and so these values do not affect the subsystem until they are applied to the RDF configuration
file with the ADD command.
Example
To configure a monitor process named $MON1 to run in CPUs 0 and 1 at a priority of 180, issue
the following commands after RDF has been initialized:
]SET MONITOR PROCESS $MON1
]SET MONITOR CPUS 0:1
]SET MONITOR PRIORITY 180
]ADD MONITOR
SET NETWORK
The SET NETWORK command sets RDF network configuration parameters within the RDF
configuration memory table. The supplied values are not applied to the RDF configuration file,
however, until you issue an ADD NETWORK command.
SET NETWORK network-option
where network-option is:
{PRIMARYSYSTEM primary-system
}
{BACKUPSYSTEM backup-system }
{REMOTECONTROLSUBVOLUME subvolume }
{PNETTXVOLUME $volume }
PRIMARYSYSTEM
primary-system
For a network master, specifies the name of the primary system.
For a nonnetwork master, specifies the name of the network master’s primary system.
RDFCOM Commands 225