HP NonStop RDF, Руководство по управлению

Страница: 205 / 478

HISTORY
OBEY
OPEN
OUT
RDF Concepts:
Abbreviations
RDF error messages:
error-number
E.g., "help 700"
prints an explanation for the RDF error message 700
To display information about RDF message 715, enter:
]HELP 715
RDFCOM displays the following description:
-------------------------------------------------------------
| 715 Primary Stopped |
-------------------------------------------------------------
Cause: The primary process of a NonStop process pair
has stopped. This probably was the result of an
operator inadvertently issuing a STOP command
from TACL.
Effect: The backup process takes over, but not in
fault-tolerant mode, until the primary process
can be re-created.
Recovery: This is an informational message; no recovery
is required.
HISTORY
The HISTORY command displays the ten most recently issued RDFCOM commands (including
the HISTORY command itself).
HISTORY
Where Issued
Primary or backup system.
Security Restrictions
None; anyone can enter the HISTORY command.
RDF State Requirement
You can enter the HISTORY command at any time, whether or not RDF has been started.
Examples
Suppose the following RDFCOM commands are the nine most recently issued:
]ADD EXTRACTOR
]START RDF
]SHOW EXTRACTOR
]ALTER EXTRACTOR PRIORITY 170
]SHOW RECEIVER
]ALTER RECEIVER PRIORITY 175
]STATUS RDF
]ALTER MONITOR PRIORITY 195
]INFO *
RDFCOM Commands 205