HP NonStop RDF Скачать руководство пользователя страница 316

Страница: 316 / 478

Error errnum received when attempting to obtain info on file filename.

errnum

is a file-system error number.

filename

is the name of a lockstep file.

Cause

The lockstep gateway received the specified error while attempting to call

FILE_GETINFOLIST_ on the specified file.

Effect

The lockstep gateway stops.

Recovery

Correct the error condition and restart the lockstep gateway.

Error errnum returned when attempting to update file filename.

errnum

is a file-system error number.

filename

is the name of a lockstep file.

Cause

The lockstep gateway received the specified error while attempting to update the

specified lockstep file.

Effect

The lockstep gateway stops.

Recovery

Correct the error condition and restart the lockstep gateway.

The RDF lockstep file filename has an incorrect file code.

filename

is the name of a lockstep file.

Cause

The specified lockstep file has the wrong file code.

Effect

The lockstep gateway stops.

Recovery

Either the file was not created by the lockstep process, or the file code was incorrectly

altered. Purge the file and restart the lockstep gateway.

Lockstep file filename is not audited.

filename

is the name of a lockstep file.

Cause

The specified lockstep file does not have the audit attribute set.

Effect

The lockstep gateway stops.

Recovery

Either the file was not created by the lockstep process, or the audit attribute was

erroneously turned off. Purge the file and restart the lockstep gateway.

Invalid message-id msgid returned from RDF extractor.

msgid

is the invalid message id.

Cause

The lockstep gateway sent a request to the RDF extractor, and the latter returned the

included message id number.

316

Process-Lockstep Operation

Содержание NonStop RDF































































































































































































































































































































































































































































































Результаты поиска

Содержание NonStop RDF

Отзывы:

Похожие инструкции для NonStop RDF

Бренды по названию

Популярные бренды

HP NonStop RDF, Руководство по управлению

Результаты поиска

Содержание NonStop RDF

Отзывы:

Похожие инструкции для NonStop RDF

Бренды по названию

Популярные бренды