HP NonStop RDF, Руководство по управлению

Страница: 349 / 478

A RDF Commands Quick Reference
The syntax rules for the RDFCOM and RDFSCAN commands, explained in detail in Chapter 8
(page 187) and Chapter 9 (page 261) , are summarized in this appendix. This appendix, which is
written for system managers and operators, summarizes the syntax descriptions for:
• The command to run RDFCOM from the Guardian user interface to the NonStop operating
system. See
“RDFCOM Run Syntax” .
• The RDFCOM commands, listed in alphabetical order, beginning with the ADD command.
See
“RDFCOM Commands Quick Reference” (page 349)
• The RDFSCAN commands, listed in alphabetical order, beginning with the AT command.
See
“RDFSCAN Commands Quick Reference” (page 357) .
• The file names and process identifiers that are common parameters in many RDFCOM and
RDFSCAN commands. See
“File Names and Process Identifiers” (page 358) .
RDFCOM Run Syntax
RDFCOM runs under the Guardian user interface (normally the TACL command interpreter)
to the NonStop operating system. The RDFCOM command starts a session that lets you enter
RDFCOM commands interactively, noninteractively, or through a command file.
Where issued: primary or backup system.
Security: Any user.
RDFCOM [/[IN command-file ] [,OUT output-file ]/ ]
[control-subvolume] ; [command [; command ]...]
For more detailed information about RDFCOM commands, see Chapter 8 (page 187) .
RDFCOM Commands Quick Reference
ADD
The ADD command applies configuration parameter values for the specified process or other
object to the RDF configuration file.
Where Issued: Primary system only.
Security: Super-user group member
ADD {RDF }
{MONITOR }
{EXTRACTOR }
{RECEIVER }
{IMAGETRAIL $volume
}
{PURGER }
{RDFNET }
{NETWORK }
{[VOLUME] $volume
}
{TRIGGER trigger-type }
ALTER
The ALTER command changes the setting of the specified parameter in the RDF configuration
file to the supplied value.
Where Issued: Primary system only except for the Takeover Trigger that can be altered on primary
or backup system.
Security: Super-user group member.
ALTER {RDF global-option }
{MONITOR monitor-option }
{EXTRACTOR extractor-option }
RDFCOM Run Syntax 349