HP NonStop RDF, Руководство по управлению

Страница: 244 / 478

Examples
To start RDF with updating enabled, enter:
]START RDF
To start RDF with updating disabled, enter:
]START RDF, UPDATE OFF
START UPDATE
The START UPDATE command starts all updater processes on the backup system.
START UPDATE
Where Issued
Primary system only.
Security Restrictions
You can issue the START UPDATE command if you are a member of the super-user group and
have a remote password from the RDF primary system to the backup.
RDF State Requirement
Before you can issue this command, RDF must be running.
Usage Guidelines
After the updater processes start, they examine the audit data in the RDF image files and apply
any changes to the backup database.
Example
To initiate updating on the backup system of all volumes protected by RDF, enter:
]START UPDATE
STATUS
The STATUS command displays current configuration information and operational statistics for
the RDF environment, or specified portions thereof. All forms of the STATUS command, except
STATUS RTDWARNING, automatically include information and statistics for the monitor
process.
STATUS {MONITOR } [, PERIOD seconds[, COUNT repeat]]
{RDF }
{EXTRACTOR }
{RECEIVER }
{PURGER }
{PROCESS procname }
{VOLUME }
{RTDWARNING }
{RDFNET }
MONITOR
requests information and statistics for the monitor process. All STATUS commands display
details for the RDF monitor process except the STATUS RTDWARNING command.
RDF
requests information and statistics for the entire RDF environment.
EXTRACTOR
requests information and statistics for the extractor process.
244 Entering RDFCOM Commands