HP NonStop RDF, Руководство по управлению

Страница: 346 / 478

d. Once the remote mirror is started, issue SCF START $audit-vol (which causes the revive
from -M to -P)
e. Start TMF. When startup is complete, the database on the primary system contains the
same data that the database on the backup system had at the conclusion of the RDF
takeover operation.
CommitHoldMode OFF or Disabled
If any local disk (the MAT or any auxiliary audit trail) has more audit records than the
corresponding remote mirror (this can only happen if CommitHold was not configured or
was configured but disabled on the primary system when the outage occurred):
1. Issue SCF STOP $
audit-vol
on the ZLT standby system (this stops the remote mirror
on the ZLT standby system).
2. Connect the remote mirror to the former primary system.
3. Issue SCF START $
audit-vol
(this causes a revive from -P to -M).
4. Start TMF.
5. Initiate TMF file recovery with the MAT position option, where the position you specify
is the MAT position reported in the RDF 888 event on the backup system. The RDF
event 888 is logged when the takeover operation completes.
3. For information about how to return your application processing to the former primary
system, see
“Carrying Out a Planned Switchover” (page 136) .
ZLT and RDF Networks
If you have an RDF network and also want ZLT protection on any of the nodes in that network,
then every node that participates in a user transaction must be configured for ZLT protection.
For example, assume that systems \A and \B are both configured as nodes within an RDF
network, and that system \B is also configured for ZLT protection.
If system \A starts a transaction and any updates associated with that transaction are done on
system \B, then system \A also must be configured for ZLT protection.
STOP TMF Operations
Within an RDF environment that is configured for ZLT processing, STOP TMF operations are
handled as follows:
During Normal Operations
If updating is off, the TMF shutdown audit-record is not stored in image trails, and the monitor,
extractor(s), receiver(s), and purger RDF processes stop.
If updating is on, the shutdown audit-record is stored in image trails, and all RDF processes stop.
During ZLT Takeover Processing
During Phase 1 of the ZLT Takeover processing, the shutdown audit-record is not stored in
image trails, and the RDF processes continue running.
The goal of ZLT processing is to catch up data as quickly as possible. Thus, there is no point in
stopping RDF processes if a STOP TMF record is found in the master audit trail (MAT).
346 Zero Lost Transactions (ZLT)