HP NonStop RDF, Руководство по управлению

Страница: 352 / 478

Where Issued: Primary or backup system.
Security: Any user.
OUT [\system.][$volume.][subvolume.][file]
RESET
The RESET command resets all configuration parameters for the specified process to their default
values within the RDF configuration memory table. The corresponding parameters within the
configuration file do not change, however, unless you issue an ADD command.
Where Issued: Primary system only.
Security: Super-user group member.
RESET {RDF }
{MONITOR }
{EXTRACTOR }
{RECEIVER }
{VOLUME }
{IMAGETRAIL }
{PURGER }
{RDFNET }
{NETWORK }
{TRIGGER }
SET EXTRACTOR
The SET EXTRACTOR command sets the designated configuration parameters for the extractor
process to the supplied values within the RDF configuration memory table. The supplied values
are not applied to the RDF configuration file, however, until you issue an ADD command.
Where Issued: Primary system only.
Security: Super-user group member.
SET EXTRACTOR extractor-option
where extractor-option is:
{CPUS primary-CPU : backup-CPU
}
{PRIORITY priority }
{PROCESS process-name }
{ATINDEX audittrail-index-number }
{RTDWARNING rtd-time }
{VOLUME volume-name }
SET IMAGETRAIL
The SET IMAGETRAIL command associates an image trail with a specific audit trail on the
primary system. The supplied value is not applied to the RDF configuration file, however, until
you issue an ADD IMAGETRAIL command.
Where Issued: Primary system only.
Security: Super-user group member.
SET IMAGETRAIL ATINDEX audittrail-index-number
SET MONITOR
The SET MONITOR command sets the designated configuration parameters for the monitor
process to the supplied values within the RDF configuration memory table. The supplied values
are not applied to the RDF configuration file, however, until you issue an ADD command.
Where Issued: Primary system only.
Security: Super-user group member.
SET MONITOR monitor-option
where monitor-option is:
352 RDF Commands Quick Reference